Two dimensional analytical solution for a partially vegetated compound channel flow

The theory of an eddy viscosity model is applied to the study of the flow in a compound channel which is partially vegetated. The governing equation is constituted by analyzing the longitudinal forces acting on the unit volume where the effect of the vegetation on the flow is considered as a drag force item, The compound channel is divided into 3 sub-regions in the transverse direction, and the coefficients in every region＇s differential equations were solved simultaneously. Thus, the analytical solution of the transverse distribution of the depth-averaged velocity for uniform flow in a partially vegetated compound channel was obtained. The results can be used to predict the transverse distribution of bed shear stress, which has an important effect on the transportation of sediment. By comparing the analytical results with the measured data, the analytical solution in this paper is shown to be sufficiently accurate to predict most hydraulic features for engineering design purposes.     

Positive solutions of three-point boundary value problems

In this paper, we consider existence of single or multiple positive solutions of three-point boundary value problems involving one-dimensional p-Laplacian. We then study existence of solutions when the problems are in resonance cases. The proposed approach is based on the Krasnoselskii＇s fixed point theorem and the coincidence degree.     

功能梯度截顶圆锥壳的热弹性弯曲精确解

研究了功能梯度材料截顶圆锥壳在横向机械载荷与非均匀热载荷同时作用下的变形问题. 基于经典线性壳体理论推导出了以横向剪力和中面转角为基本未知量的功能梯度薄圆锥壳轴对称变形的混合型控制方程. 假设功能梯度圆锥壳的材料性质为沿厚度方向按照幂函数连续变化的形式. 然后采用解析方法求解,得到了问题的精确解. 分别就两端简支和两端固支边界条件,给出了圆锥壳的变形随其载荷、材料参数等变化的特征关系曲线,重点分析和讨论了载荷参数与材料梯度变化参数对变形的影响.      

液粒凝固过程的动力学理论

在平均场的概念下对液态粒子的凝固过程提出了一个简化的液-固-气-雾(LSGF)数学模型,并在小过冷度的条件下,求出了有关初值问题的一致有效渐近解. 结果表明:整个动力学过程可以分为两个相互联结的时间阶段. (1) 液粒初始温度分布的瞬态过渡阶段. 在这个阶段,凝固尚未正式启动,只是系统内的温度从任意给定的初始分布迅速调整到某一特定空间分布. (2)液粒向固粒转变阶段. 在这一阶段,液-固两相开始分离,相界面逐渐向液粒中心传播,直至液相完全消失. 进而以铜为例,讨论了液态粒子在不同生长条件与物理参数下的凝固时间与凝固过程中的温度分布的演化规律.      

ANALYTICAL SOLUTIONS TO STRESS CONCENTRATION PROBLEM IN PLATES CONTAINING RECTANGULAR HOLE UNDER BIAXIAL TENSIONS

The stress concentration problem in structures with a circular or elliptic hole can be investigated by analytical methods. For the problem with a rectangular hole, only approximate results are derived. This paper deduces the analytical solutions to the stress concentration problem in plates with a rectangular hole under biaxial tensions. By using the U-transformation technique and the finite element method, the analytical displacement solutions of the finite element equations are derived in the series form. Therefore, the stress concentration can then be discussed easily and conveniently. For plate problem the bilinear rectangular element with four nodes is taken as an example to demonstrate the applicability of the proposed method. The stress concentration factors for various ratios of height to width of the hole are obtained.     

TRANSIENT TORSIONAL WAVE IN FINITE HOLLOW CYLINDER WITH INITIAL AXIAL STRESS

An analytical solution is obtained for transient torsional vibration of a finite hollow cylinder with initial axial stress. The cylinder is subjected to dynamic shearing stress at the internal surface and is fixed at the external surface. The basic equations are presented and the solution is obtained by means of Fourier series expansion technique and the separation of variables method. The effects of the initial stress on the natural frequencies and transient torsional responses are presented and discussed.     

A generalized auxiliary equation method and its applications

In this paper, a generalized auxiliary equation method with the aid of the computer symbolic computation system Maple is proposed to construct more exact solutions of nonlinear evolution equations, namely, the higher-order nonlinear Schrödinger equation, the Whitham–Broer–Kaup system, and the generalized Zakharov equations. As a result, some new types of exact travelling wave solutions are obtained, including soliton-like solutions, trigonometric function solutions, exponential solutions, and rational solutions. The method is straightforward and concise, and its applications are promising.     

An analytical solution to non-axisymmetric heat transfer with viscous dissipation for non-Newtonian fluids in laminar forced flow

Forced convection heat transfer in a non-Newtonian fluid flow inside a pipe whose external surface is subjected to non-axisymmetric heat loads is investigated analytically. Fully developed laminar velocity distributions obtained by a power-law fluid rheology model are used, and viscous dissipation is taken into account. The effect of axial heat conduction is considered negligible. The physical properties are assumed to be constant. We consider that the smooth change in the velocity distribution inside the pipe is piecewise constant. The theoretical analysis of the heat transfer is performed by using an integral transform technique – Vodicka’s method. An important feature of this approach is that it permits an arbitrary distribution of the surrounding medium temperature and an arbitrary velocity distribution of the fluid. This technique is verified by a comparison with the existing results. The effects of the Brinkman number and rheological properties on the distribution of the local Nusselt number are shown.     

Semi-analytical three-dimensional elasticity solutions for generally laminated composite plates

Semi-analytical solutions for bending and free vibration of composite laminated plates have been derived based on three-dimensional elasticity theory using a newly developed hybrid analysis, which perfectly combines the state space approach (SSA) and the technique of differential quadrature (DQ). The thickness direction of laminates is selected as the transfer direction in SSA, and the DQ technique is employed to discretize the in-plane domains. This actualizes the transformation of the original partial differential equations into a state equation consisting of first-order ordinary differential equations. In particular, the use of DQ technique makes ease of the treatment of various boundary conditions, which cannot be considered in the conventional exact SSA. To avoid numerical instabilities in the conventional transfer matrix method, artificial interfaces are introduced to divide each layer into several sub-layers to reduce the transfer distance and the joint coupling matrices are established according to the continuity conditions at actual and artificial interfaces to implement the global analysis. Comprehensive numerical examples are preformed to validate the present hybrid method. Effects of some parameters on mechanical properties of the laminates are discussed.     

二甲基亚砜-水混合溶液的等效介电常数特异性研究

在2.45 GHz下利用微扰谐振腔法测量二甲基亚砜(DMSO)-水(H₂O)混合溶液的等效介电常数过程中, 发现混合溶液等效介电常数虚部大于其中任一组分的介电常数虚部的特异现象. 分析表明, 这种特异性现象的发生主要是由于DMSO与H₂O混合后溶液的高频摩擦项大于混合前引起的. 因此, 经典混合物介电常数公式需要进行适当修正才能较好地适用于这类特异性问题计算.